Logo
Home > Product Information > PLACOM Series
KP-90N
KP-90N
KP-92N
KP-92N		 KP-80N
KP-80N		 KP-82N
KP-82N

N-Series with the most advanced functions and perfect reliability.

The most standard model of "PLACOM" N-Series has made the
excitingly highest attainment in the history of Planimeter ever made.
Measuring capacity is remarkably enlarged.
Measuring by 6-digit pulse count enables to measure 100 times
larger accumulative area than ordinary planimeters.
Easy calculations of Cumulative and Average Value Measurement.
Conversion of Unit and Scale value is made by easy operation.
"WONDER", it is a most worthy word to be given to this "PLACOM" N-Series.
Applications
Construction and civil engineeringForestry area
Land developing planningShip designing
Machine designingMedical research
Datalanalysis in statisticsAgriculture
Architecture and interior designing

Special features of PLACOM N-Series
Measurement by 6 dlglt pulse count
This N-Series can measure the area by pulse count of 6-digits. This method enables a larger cumulative measurement of area (Up to 1Om2)
Maximum cumulative measurement value of 10m2
With the measurement by 6-digit pulse count, the N-Series Planimeter can measure a larger area by 100 times than ordinary Planimeter.
The conventional planimeter has a maximum cumulative area to measure only 0.1m2. If measurement value shows over 0.1m2 when measuring, the display is to be reset to "O".
This requires to register the numbers of how many times these resettings are occurred.
With the New PLACOM N-Series, there is no need of these troublesome procedures.
Easy conversion function of unit and scale
KP-90N and KP-80N can convert easily the measured area value into a new area value in a newly desired unit and with a newly desired scale value.
KP-92N and KP-82N can convert the unit between in2 and cm2
Hold memory function
In cumulative measurement, this Hold Memory function is effectively used. If an error occurs in measuring, press C/AC key. Then last measured value is appeared by pulse oount. Since previous measured values before error are stored, there is no need to another measurements from the beginning.
Automatic shifting of unit to upper unit
When the measured area value overtlows the displayed figures of 8 digits, the measured area value is calculated and displayed by an upper unit. When the overflows is occurred in the uppermost unit, km2, acre, the measurement can be continued by pulse count display.
Average value measurement
In order to get better result of measurement, Mean value measurement is recommended. This measurement can be easily done on this N-Series.
Measurement of an area with different lateral and longitudinal Scale.
Auto-power-off function for energy saving

Specifications of PLACOM N-Series
KP-90NKP-92NKP-80NKP-82N
Type Roller Type Polar Type
With Computing Function Single Function With Computing Function Single Function
Display Liquid Crystal, 8-digit Figures
13Symbols 6Symbols 13Symbols 6Symbols
Symbol Batt-E,SCALE
MEMO,HOLD
cm2, m2,km2 ,in2, ft2,acre,etc.		 Batt-E,SCALE
MEMO,HOLD
cm2,in2, etc.		 Batt-E,SCALE
MEMO,HOLD
cm2,m2, km2,in2, ft2,acre,etc.		 Batt-E,SCALE
MEMO,HOLD
cm2,in2, etc.
Converting Function Unit and Scale value Unit(in2, cm2 Unit and Scale value Unit(in2, cm2
Accumulated
Measuring Value		 Maximum 10m2(Scale 1:1)
Measuring Range Maximum vertical width: 325mm
Horizntal roller rotating length: 30m		 Maximum, with the pole put outside the pattern: 300mm in diameter
Maximum, with the pole put inside the pattern: 800mm in diameter
Accuracy Within +/-0.2%(Within +/-2/1000pluses)
Power Supply Built-in Ni-MH Battery(rechargeable through AC Adapter)
AC Adapter 100-240V (Auto-power-off function is provided.)
Operating Duration Approx. 30 hours of continuous operation
Battery Charging Time Approx. 15 hours
Main Unit Weight 750g 780g
Accessories Supplied AC Adapter and Plastic Case

Instruction Manual pdf
Koizumi Sokki http://www.fymetrix.co.jp/index_e.htm
 Please link this page freely!